山东美国LECO氧氮氢分析仪优惠价格

Sample Preparation

Sampling and sample preparation is an important issue because traditional methods used to obtain samples for oxygen and nitrogen determination are different from those recommended for hydrogen, especially when sampling molten metal. The main difference in steel sampling procedures for oxygen/nitrogen and hydrogen is due to the mobilityof hydrogen. Special precautions must be used when sampling for hydrogen. From molten steel and iron, a sample must be quickly quenched in cold water and chilled in a refrigerant such as liquefied nitrogen or a mixture of acetone and solid carbon dioxide in order to reduce losses of hydrogen from diffusion. Losses of oxygen and nitrogen from diffusion are not a problem. A sample that is taken for hydrogen and

chilled in a refrigerant can also be used for oxygen and nitrogen determination. However, a sample that is typically taken for oxygen and/or nitrogen determination is not suitable for hydrogen determination due to hydrogen loss (diffusion). Surface contamination must be removed by filing or light grinding, using care not to overheat the sample.

高级诊断程序包括全数字化的在线操作手册、维护模拟演示、图片说明等提供快速指导。山东美国LECO氧氮氢分析仪优惠价格

美国LECO力可氧氮氢分析仪ONH836（氧氮氢联测仪）系列硬件部分

特点和优势

1、炉头区域LED照明系统

2、炉头快速拆装的粉尘过滤装置

3、装有自动旁路阀的可快速拆装氧水捕集装置

4、**的动态流量补偿（DFC）保证热导池气体流量、压力恒定

5、改进的红外检测池技术

     新红外池的恒温绝热技术消除了外界环境温度的干扰

   长寿命的红外发射光源和无漂移的电路设计保证红外检测池的长期稳定

   氧高低双量程采用3个碳红外检测器，同时检测一氧化碳和二氧化碳，保证准确定量

  6、高效脉冲炉冷却系统

   强力内循环水冷装置

   双直流风扇保证持续冷却，不受电压波动的影响

   新电极炉头设计，提高脉冲炉热交换效率

  7、全自动分析系统（可选）

   自动清扫装置

   20位或100位全自动分析系统

   高速全自动真空除尘装置直接将粉尘排至仪器外部捕集器中，消除环境污染

安徽元素分析仪哪家好可选具有压力补偿和温度控制性能的标气检测气路。

氧氮氢分析仪的常见故障及解决方法

仪器启动时显示。没有水流。系统分析电流切断，分析停止。这是水流探测器不正常，水泵不工作，管道堵塞。将仪器的右面板取下，观察水流探测器，用手挤压补水塑料水瓶，发现水流正常，显示正常，证明水流探测器正常，管道畅通。启动循环水泵，但分析仪显示没有水流，此时可判定水泵不正常。打开水泵转子密封口，启动泵发现电机正常运转，此时关闭进水，拆下水泵，发现叶轮脱落。经了解，判定是由于外部冷却水停水，仪器内循环水温过高（水温应≤70℃），致使叶轮（叶轮材料PVC）热胀并脱轴。用粘合剂粘合叶轮后再粘于叶轮轴上，待粘合剂凝固后试车，仪器运行正常。

Sample Preparation

Typically, titanium and zirconium samples are chemically etched to remove surface contamination when oxygen and nitrogen are determined. However, etching can introduce hydrogen into the sample.

ASTM method E 1409 "Determination of Oxygen and Nitrogen in Titanium and Titanium Alloys by the Inert

Gas Fusion Technique", as updated in 1996, permits either etching or abrading (filing) of the test specimen.

ASTM E 1447 "Determination of Hydrogen in Titanium and Titanium Alloys by the Inert Gas Fusion Thermal

Conductivity/Infrared Detection Method" permits surface preparation by abrading (if necessary to remove

contamination). Differences in sample preparation present somewhat of a dilemma regarding simultaneous

determination of O, N, and H in titanium. However, abrading samples with a file to remove surface

contamination will yield accurate O, N, and H results. The ONH836 utilizes a high-power electrode furnace to quickly and efficiently release the target gases from within the sample, which allows for a very rapid simultaneous determination of oxygen, nitrogen, and hydrogen.

Instrument calibration/drift correction

f. Clean the upper and lower electrode manually, or, if applicable, remove the crucible and press the analyze button to clean with the automatic cleaner.

g. Firmly place a graphite crucible on the lower electrode tip.

h. Press the Analyze button on the instrument screen, the lower electrode will close and the analysis sequence will start and end automatically.

i. Repeat steps 3b through 3h a minimum of three times for each calibration/drift standard used.

. Calibrate/drift following the procedure outlined in the operator's instruction manual.

长寿命的红外发射光源和无漂移的电路设计保证红外检测池的长期稳定性。山东美国LECO氧氮氢分析仪优惠价格

由于在重大工程、工业装备和质量保证、基础科研中，仪器仪表都是必不可少的基础技术和装备重点，除传统领域的需求外，新兴的智能制造、离散自动化、生命科学、新能源、海洋工程、轨道交通等领域也会产生巨大需求。中国的新型工业化进程，信息化和工业化融合的进一步加深，带动各个工业领域对于光谱仪，色谱仪，质谱仪，样品前处理等产品的需求。在国民经济运行中，从事仪器科技、医疗科技、检测科技领域内的技术咨询、技术服务，仪器仪表的修理，仪器仪表、实验室设备、机械设备及配件、机电设备及配件、电子产品、化工产品及原料（除危险化学品、监控化学品、烟花爆竹、民用易爆物品、易制毒化学品）、第二类医疗器械的销售，机械设备租赁，电子商务，货物进出口，技术进出口。等设备是提高劳动生产率的倍增器，对国民经济有着巨大的作用和影响力。美国商业部地区技术和标准研究院（NIST）提出的报告称：美国90年代仪器仪表工业产值只占工业总产值的4%，但它对国民经济（GNP）的影响面却达到66%。从贸易广义角度来说，仪器仪表也可具有自动操控、报警、信号传递和数据处理等功能，例如用于工业生产过程自动操控中的气动调节仪表，和电动调节仪表，以及集散型仪表操控系统也皆属于仪器仪表。山东美国LECO氧氮氢分析仪优惠价格

上海禹重实业有限公司主要经营范围是仪器仪表，拥有一支专业技术团队和良好的市场口碑。公司业务涵盖光谱仪，色谱仪，质谱仪，样品前处理等，价格合理，品质有保证。公司将不断增强企业重点竞争力，努力学习行业知识，遵守行业规范，植根于仪器仪表行业的发展。禹重科技凭借创新的产品、专业的服务、众多的成功案例积累起来的声誉和口碑，让企业发展再上新高。