新疆氧氮氢分析仪供应商

Procedure - Solid Samples

Prepare the instrument as outlined in the operator's instruction manual.

Determine the instrument blank.

Login a minimum of 3 Blank replicates.

Press the Analyze button on the instrument screen. After a short delay, the loading head slide-block will open. Place a 502-344 Nickel Basket into the loading head.

Note: samples using automation should be placed in the appropriate autoloader position before starting the

analysis sequence. Once the sequence has started, the automatic analysis will start and end automatically.

可选具有压力补偿和温度控制性能的标气检测气路。新疆氧氮氢分析仪供应商

Oxygen, Nitrogen, and Hydrogen in Refractory Metals

Summary

Titanium is a metal that can be combined with elements such as aluminum, vanadium, molybdenum, and tin to produce high-strength, lowdensity, and corrosion-resistant alloys. Titanium alloys are used by the military, medical devices, sporting goods, and aerospace industries because of these properties, and due to the strict demands of these industries, effort needs to be taken to assure that the material meets the highest of quality standards.

广东美国LECO分析仪咨询报价Cornerstone氢氧氮分析软件同时支持***的书记文档格式和可变的报告格式。

Procedure – Powder/Chip Samples

Instrument calibration/drift correction.

Calibrate/drift following the procedure outlined in the operator's instruction manual.

Analyze Samples.

Login Sample with the appropriate number of reps.

Weigh approximately *** grams of appropriately prepared sample into a *** Nickel Capsule, enter mass and sample identification into appropriate rep fields. If applicable, place the nickel capsule in the

appropriate autoloader position.

Repeat steps 3c through 3i for sample analysis.

Summary

The determination of the amount of oxygen, nitrogen, and hydrogen in iron, steel, nickel-, and cobalt-base alloys represents some of the most important quality metrics for these materials. Oxygen is used to create steel from pig iron by removing excess carbon. Oxygen content must be controlled to limit the amount of carbon monoxide that can be formed during solidification which may cause excessive porosity. Nitrogen is considered both an impurity as well as an important alloying agent. Itcan be present as a nitride or interstitially in its gaseous form. Increased nitrogen content is known to increase yield and tensile strength, thus decreasing ductility and formability. Excessive levels may evolve during solidification thus increasing porosity. High hydrogen content is the primary cause of embrittlement, blistering and flaking due to its high

mobility through the lattice and provides no potential alloying benefits. The ONH836 utilizes a high-power

electrode furnace to quickly and efficiently release the target gases from within the sample, which allows

for a very rapid simultaneous determination of oxygen, nitrogen, and hydrogen.

**的动态流量补偿（DFC）保证热导池气体流量、压力恒定。

Procedure - Solid Samples：

--Instrument calibration/drift correction.

Place the nickel basket containing the calibration/drift standard into the open port at the top of the loading head.

Press the Analyze button on the instrument screen again, the loading head slide-block will close and the lower electrode will open.

Clean the upper and lower electrode manually, or, if applicable, remove the crucible and press the analyze button to clean with the automatic cleaner.

力可创新的批次和重复样品数据分组功能极大简化了样品结果输出和结果标准偏差的自动计算。新疆氧氮氢分析仪供应商

配置SmartLine® Remote远程诊断功能。新疆氧氮氢分析仪供应商

美国力可LECO氧氮氢分析仪

公司介绍：

美国力可公司(LECO)始于1936年 ，以生产用于冶金、机械、能源、化工、农业、食品及科研开发领域的各种分析仪器。

ONH836氧气/氮气/氢气元素分析仪设计用于使用惰性气体熔融技术对无机材料，铁和非铁合金以及耐火材料中的氧，氮和氢含量进行宽范围的测量。

坚固的样品加载区域可简化日常维护并大程度减少大气污染

用于氧气检测的三重红外电池可实现业内大的检测范围

通过自动化选项提高实验室生产率

可用的自动清洁器大程度地减少了两次分析之间的手动清洁需求

适用于坩埚和样品的20位往复式装载机

安装在动臂上的触摸屏界面可提供更好的人体工程学设计和直观的操作

红外（IR）和热导率（TC）检测器，没有活动部件，也无需手动调节

改善TC电池的稳定性

可绕过的OMI-2载气洗涤塔，提高了TC电池的稳定性

获得Dyanamic流量补偿可进一步增强TC细胞的稳定性

新疆氧氮氢分析仪供应商

上海禹重实业有限公司致力于仪器仪表，是一家服务型公司。公司自成立以来，以质量为发展，让匠心弥散在每个细节，公司旗下光谱仪，色谱仪，质谱仪，样品前处理深受客户的喜爱。公司从事仪器仪表多年，有着创新的设计、强大的技术，还有一批**的专业化的队伍，确保为客户提供良好的产品及服务。禹重科技凭借创新的产品、专业的服务、众多的成功案例积累起来的声誉和口碑，让企业发展再上新高。