广东氧氮氢分析仪采购

力可ONH836氧氮氢分析仪

特点和优势

国际**的非色散红外及热导检测器 ，无移动部件，不需要手动调整

采用三个**的红外器检测氧含量，同时检测CO和CO2，然后在转化为CO2集中检测，原理上是**完善的，所以不仅可以保证中间量程的测量精度，在**含量和高含量的检测范围内同样可以满足精度要求

高性能的红外检测器配置***恒温绝热技术，消除了外界环境温度的干扰

长寿命的红外发射光源和无漂移的电路设计保证检测器的长期稳定性

力可**的动态流量补偿控制DFC系统，保证了流量系统的完善，可以精确控制整个气路中的流量，保持流量恒定**改善了材料中氮分析的准确度

可以旁路的OMI-2 气路强化过滤装置增强了检测器的稳定性，使得分析结果更加准确

可选自动功能

20位试样自动进样系统

通用下电极坩埚支座，容纳各种坩埚使用

无需人工干预的全自动清扫系统

工具条、滑动条和下拉式菜单简化了校正和数据处理的参数设定。广东氧氮氢分析仪采购

User-Friendly Brand Software Cornerstone

LECO's exclusive brand software enables the user to have complete access to analysis Cornerstone control, method settings, diagnostics, reporting, and more in a highly organized and immersive environment. Designed through a collaboration of customer feedback and innovative engineering,Cornerstone allows the user to conduct all of their day-to-day operations within a single Analysis screen designed for speed and ease-of-use. Our innovative grouping of sample data into sets and replicates simplifies the data output and automatically calculates relevant statistics, alleviating the need for additional data processing.

浙江LECO氧氮氢分析仪厂家直销高级诊断程序包括全数字化的在线操作手册、维护模拟演示、图片说明等提供快速指导。

Oxygen, Nitrogen, and Hydrogen in Refractory Metals

Summary

Titanium is a metal that can be combined with elements such as aluminum, vanadium, molybdenum, and tin to produce high-strength, lowdensity, and corrosion-resistant alloys. Titanium alloys are used by the military, medical devices, sporting goods, and aerospace industries because of these properties, and due to the strict demands of these industries, effort needs to be taken to assure that the material meets the highest of quality standards.

仪器的亮点和优势：

特点和优势

·炉头区域LED照明系统

·炉头快速拆装的粉尘过滤装置

·装有自动旁路阀的可快速拆装氧水捕集装置

·**的动态流量补偿（DFC）保证热导池气体流量、压力恒定

高效脉冲炉冷却系统

·强力内循环水冷装置热交换效率

·双直流风扇保证持续冷却，不受电压波动的影响

·***电极炉头设计，提高脉冲炉

全自动分析系统（可选）

·自动清扫装置

·20位或100位全自动分析系统

·高效全自动真空除尘装置直接将粉尘排至仪器外部捕集器中，消除环境污染

改进的红外检测池技术

·***红外池的恒温绝热技术消除了外界环境温度的干扰

·长寿命的红外发射光源和无漂移的电路设计保证红外检测池的长期稳定性

·氧高低双量程采用3个碳红外检测器同时检测一氧化碳和二氧化碳，保证准确定量 长寿命的红外发射光源和无漂移的电路设计保证检测器的长期稳定性。

Procedure - Solid Samples

Prepare the instrument as outlined in the operator's instruction manual.

Determine the instrument blank.

Login a minimum of 3 Blank replicates.

Press the Analyze button on the instrument screen. After a short delay, the loading head slide-block will open. Place a 502-344 Nickel Basket into the loading head.

Note: samples using automation should be placed in the appropriate autoloader position before starting the

analysis sequence. Once the sequence has started, the automatic analysis will start and end automatically.

采用三个**的红外器检测氧含量，同时检测CO和CO2，然后在转化为CO2集中检测。广东氧氮氢分析仪采购

Sample Preparation

Sampling and sample preparation is an important issue because traditional methods used to obtain samples for oxygen and nitrogen determination are different from those recommended for hydrogen, especially when sampling molten metal. The main difference in steel sampling procedures for oxygen/nitrogen and hydrogen is due to the mobilityof hydrogen. Special precautions must be used when sampling for hydrogen. From molten steel and iron, a sample must be quickly quenched in cold water and chilled in a refrigerant such as liquefied nitrogen or a mixture of acetone and solid carbon dioxide in order to reduce losses of hydrogen from diffusion. Losses of oxygen and nitrogen from diffusion are not a problem. A sample that is taken for hydrogen and

chilled in a refrigerant can also be used for oxygen and nitrogen determination. However, a sample that is typically taken for oxygen and/or nitrogen determination is not suitable for hydrogen determination due to hydrogen loss (diffusion). Surface contamination must be removed by filing or light grinding, using care not to overheat the sample.

广东氧氮氢分析仪采购