浙江LECO氧氮氢分析仪优惠价格

力可ONH836氧氮氢分析仪

特征

稳固的炉头试样加载结构

试样加载过程中完全密闭，消除大气的中可能带来的杂质的污染；

简化日常分析所需的炉头进样部分机械维护工作。

可选的自动功能

上下电极自动清扫装置；

20位试样及坩埚自动进样装置。

附加功能及优点

可选六轴可旋转触摸屏幕，增强了操作的工效和直观性；

可选具有压力补偿和温度控制性能的标气检测气路；

新型气路管道减少气路连接阀，使得漏气，断路故障更少；

配置SmartLine Remote远程诊断功能。

上海禹重给您提供各种氧氮氢分析仪，欢迎来电咨询！浙江LECO氧氮氢分析仪优惠价格

Procedure – Powder/Chip Samples

Instrument calibration/drift correction.

Calibrate/drift following the procedure outlined in the operator's instruction manual.

Analyze Samples.

Login Sample with the appropriate number of reps.

Weigh approximately *** grams of appropriately prepared sample into a *** Nickel Capsule, enter mass and sample identification into appropriate rep fields. If applicable, place the nickel capsule in the

appropriate autoloader position.

Repeat steps 3c through 3i for sample analysis.

湖南进口分析仪采购可选六轴可旋转触摸屏幕，增强了操作的工效和直观性。

Procedure - Solid Samples

Press the Analyze button on the instrument screen again, the loading head slide-block will close and the lower electrode will open.

Clean the upper and lower electrode manually, or, if applicable, remove the crucible and press the analyze button to clean with the automatic cleaner

Add approximately 0.05 g of *** Graphite Powder to a *** Graphite Crucible.

Firmly place the crucible on the lower electrode tip or appropriate autoloader position.

Press the Analyze button on the instrument screen, the lower electrode will close and the analysis sequence will start and end automatically

氧氮氢分析仪是快速、准确分析氧、氮、氢元素的、高性能仪器，整机采用模块化、一体化设计，即主机由可靠的脉冲电极炉、高灵敏高精度的检测系统、布局合理和气密性好的气路系统、可靠耐用的电源系统、稳定的电路系统、高校节能的水循环散热系统等六个**的硬件模块单元组成。

氧氮氢分析仪的测量原理：

测量范围非常***。分析样品时，样品被称重后放到样品端口中，然后用载气进行冲洗，防止大气（含氧气和氮气）进入到炉子系统中。

石墨坩埚在脉冲炉中脱气，以尽量减少自带的污染。经过稳定阶段后样品落入坩埚中并熔融。样品中的氧与石墨坩埚中的碳反应生成一氧化碳。氮和氢以单质的形式释放。载气和样品气体通过粉尘过滤网后再进入到氧化铜催化炉中，将一氧化碳氧化成二氧化碳。

二氧化碳进入到红外池中用于测定氧含量，被测后的气体导入化学试剂管，这时二氧化碳和水被化学试剂除去，氮元素通过热导检测池含量被测定。测量氢时，载气换为氮气，样品气体通过舒茨试剂而不是氧化铜催化剂。测氧和氮时也可采用更廉价的氩气作为载气。 Cornerstone氧氮氢分析软件同时支持***的数据文档格式和可变的报告格式。

Oxygen, Nitrogen, and Hydrogen in Refractory Metals

Summary

Oxygen and nitrogen are alloying elements in titanium, and are also classified as alpha stabilizing elements as they promote alpha phase alloys. Interstitial oxygen and nitrogen levels can be used to regulate the tensile strength of the material, but due to its high solubility can cause unwanted surface embrittlement. This phenomenon can be leveraged,however, under controlled processing to create surface films that increase surface hardness and wear properties.

为可**的Cornerstone 氧氮氧分析软件采用触摸屏界面使用户达到分析控制、15法设定、在线诊断、数据报告。美国LECO分析仪厂家报价

减少了繁琐的额外数据处理。浙江LECO氧氮氢分析仪优惠价格

Instrument Highlights and Features

Optional Features

Optional boom-mounted touch-screen interface package (M) promotes an ergonomic workspace

Optional Performance Package (P) adds a three-stage carrier gas purification system, and a dual-loop gas dose module

Optional Dual Cooling Package (D) adds an integratedliquid-to-air radiator with dual cooling fans. This DC

option gives the user the choice of liquid-to-liquid cooling, liquid-to-air cooling, or a combination of both

Optional integrated autocleaner (H) automatically cleans the upper electrode and lower electrode tip

Optional 20-sample shuttle loader available

浙江LECO氧氮氢分析仪优惠价格